Cayman Systems 3220-H Betriebsanweisung PDF herunterladen (Seite 117)

Cayman 3220-H User’s Guide Using the Command Line Interface

December 2000 4-35

You can enter a metric of 1 to indicate either:

 The remote network is one router away and the static route is

the best way to reach it;

 The remote network is more than one router away but the static

route should not be replaced by a dynamic route, even if the

dynamic route is more efﬁcient.

delete ip static-routes destination-network net_address

Deletes a static route. Deleting a static route removes all information

associated with that route.

WAN Settings

set ip wan vccn option { on | off }

Enables or disables communications through the speciﬁed VCC

interface on the Cayman 3220-H. You must enable BNCP functions

before you can conﬁgure WAN settings.

set ip wan vccn address ip_address

Assigns an IP address to the Cayman 3220-H on the speciﬁed VCC.

The IP address you assign must be unique on your network.

set ip wan vccn broadcast broadcast_address

Speciﬁes the broadcast address for the TCP/IP network connected to

the speciﬁed VCC. IP hosts use the broadcast address to send

messages to every host on your network simultaneously.

The broadcast address for most networks is the network number

followed by 255. For example, the broadcast address for the

192.168.1.0 network would be 192.168.1.255.

set ip wan vccn netmask netmask

Speciﬁes the subnet mask for the TCP/IP network connected to the

speciﬁed VCC. The subnet mask speciﬁes which bits of the 32-bit

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 201 202

Keine Kommentare

Cayman Systems 3220-H Betriebsanweisung Seite 117